Amber Underfloor Heating Manifold

Amber stainless steel underfloor heating manifold is available in 2-12 ports. These consist of two manifold bars, one for the flow and one for the return, complete with bracket, automatic air vent, drain fill valves and pressure gauge.

An underfloor heating manifold is a system that distributes warm water to each UFH zone. They connect the underfloor heating pipework to the heat source, feeding water at the correct temperature from either the boiler (via a blending valve) or from the heat pump, directing it to each UFH pipe at the correct flow rate.

On the flow bar each port has a flow indicator, with isolator, including an easy-to-read gauge-glass. Each port on the return bar is equipped with an integral control valve and protection cap which allows the user to adjust the volume of water, or can be removed to accept a Manifold Thermoelectric Head.  Balance is achieved by adjusting the flow meters to ensure that the flow rates supplied to each zone are at the optimum level to provide an even and comfortable warmth across the entire floor.

Features and Benefits

  • Supplied pre-mounted on installation brackets
  • Valves on return manifold accept a Manifold Thermoelectric Head for remote control of each zone
  • 1″” ball valves available, filling and drain-off points (not supplied with manifold)
  • Connections are Euroconus (not supplied with manifold)
  • Flow meters with isolating valves included

Warranty: 5 years

Choose a place where you can install it easily, neatly, and where the central heating pipes can be seamlessly passed around. A suitable place for the Amber stainless steel underfloor heating manifold is often under the stairs, in the storage area or in the wall near the meter.  The size and type of manifold required for underfloor heating depends on the project, the number of rooms, flooring and the type of underfloor heating system used will all need to be taken into consideration.

How can we help?